XP95 Addressable Detectors

XP95 Addressable Detectors

The XP95 range of intelligent fire detectors is advanced in design, improved in performance and has unique features that benefit the installer and end user. The range features smoke detectors (ionisation and optical), heat detectors and a multisensor. Beam detectors, flame detectors, manual call points, audio visual signalling devices, interface units and isolators complete the range. XP95 has a ‘central intelligence’ system where all the decisions are made by the control panel.

XP95 Optical Smoke Detector

The XP95 Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smoldering fires are likely.


  • Responds well to slow-burning, smouldering fires.
  • Well suited for bedrooms and escape routes.
  • Unaffected by wind or atmospheric pressure.
  • Approvals: EN54-7/LPCB

XP95 Ionisation Smoke Detector

The XP95 Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.


  • Responds well to fast-burning, flaming fires.
  • Designed to operate in a variety of environments.
  • Minimal effects from temperature, humidity, atmospheric pressure.
  • Well protected against electromagnetic interference over a wide frequency range.

XP95 Heat Detector

The XP95 Heat Detector monitors temperature by using a single thermistor network which provides a count output proportional to the external air temperature. The XP95 range features two Heat Detectors, standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55°C. The high temperature detector, classified as a CS device, will report an alarm at 90°C.


  • Ideal in environments that are dirty or smokey under normal conditions.
  • Well suited for warehouses, loading bays and car parks.
  • Unaffected by wind or atmospheric pressure.

XP95 Manual Call Point

The XP95 Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allowsfor a quick and simple reset.


  • E-Z fit connectors
  • Front facing addressing without the need to detach the backbox
  • Unique, ergonomically designed key for resetting and front cover removal
  • Backward compatibility and retro-fit
  • Resettable element
  • Integral circuit isolator
  • AS7240-11 Approved

Satisfied Clients

“Elegance is not the prerogative of those who have just escaped from adolescence, but of those who have already taken possession of their future.”

Monalia Brown
Manager ELLO

Read Our Blog

No coding skills required to create unique sites. Customize your site in real-time and see the results instantly.

The best 20 spots for relaxing vacations

Lorem ipsum dolor sit amet, cu conceptam adolescens mea, errem quaeren...

New studies show: Vacations are needed

Lorem ipsum dolor sit amet, cu conceptam adolescens mea, errem quaeren...

Driving sales and increasing value with websites

Lorem ipsum dolor sit amet, cu conceptam adolescens mea, errem quaeren...

Organise your company business processes & save money